SEA FORCE DF-1 Dust Fume Collector

This is the Sea Force Dust Collector DF-1.
This dust collector captures dust generated during polishing work using tools like routers in engraving and accessory making.
This is the DF-1 type with one suction port. The dust collection duct is bellows-type, extends 1.4m, and allows you to fix the suction nozzle in any position.

It operates quietly, and even on a low setting, the suction power is strong, making its dust collection function very effective.
I purchased it about 6 years ago along with other equipment such as buffers.
My workshop is small, and I couldn't find a suitable fixed installation spot. I used it a few times (2-3 times) placed beside me during work, but due to the cramped space and difficulty in use, I put it away and it has been stored unused since then.

Although it has only been used a few times, due to engraving work, the filter has a thin layer of buffing powder collected on it, turning it gray.

I am also including a replacement pre-filter (set of 3) that I purchased at the same time as the machine. This is a dedicated product for this machine.

The operation check is perfectly fine. The exterior, duct, and silicone nozzle (suction port) show no signs of deterioration, damage, or dirt.
As I am renovating my workshop and will likely not use it again, I am offering it at a low price.
It's not just for metal polishing; it can also be used for wax work, 3D printing, and electronics work to collect dust and smoke from your immediate workspace, maintaining a comfortable environment without soiling your room. I highly recommend it for those who use their own room as a workspace.

There is no warranty card (the warranty period has expired).
Although it is clean, please understand that it is used equipment as it has been used a few times.
Due to workshop renovation, I have no storage space, so I am listing it for sale. Therefore, I apologize, but returns and cancellations are not accepted.

[Uses] Dust collector, solder fume extractor, laser engraving, marking, electronic device manufacturing, welding, laser welding, pharmaceuticals, laboratories, chemistry, fume extraction, 3D printing.

The three-layer filter collects everything from dust to fumes (smoke), making the air clean. It can collect particles as small as 0.3μm.
The pre-filter is inexpensive, so you can keep costs down by replacing it frequently.
The main filter contains activated carbon, which helps reduce odors.

Product Details
Dimensions: W440 x D245 x H500
Weight: Approx. 13kg
Hose connection: 75mm
Hose details: 1.4m square silicone nozzle
Power: AC100V, 130W
Accessories: Hose
Square silicone nozzle

Sea Force, Dust Fume, DF-1, Dust Collector